How to install and maintain a rubber planer

Adopting mechanical transmission for feeding, blade cutting structure, motor driven gear transmission, and high power. This machine is widely used in rubber, plastic, wires, cables, scientific research, etc., and is matched to complete the thermal extension test and tensile test of samples, so as to meet the standard requirements of the product. Especially suitable for plastic sheets of various thicknesses within the range of 1-12mm, cross-linked polyethylene plastic sheaths for wires and cables, PVC sheaths for wires and cables, etc.

After the planer enters the factory inspection, it is horizontally loaded into the base.

2. Remove rust proof grease from the exposed surface and inspect all components and appliances for looseness, loss, or damage due to shipping.

3. Connect the power supply and safety ground wire, and ensure that the direction of the motor operation is consistent with the direction indicated by the arrow on the pulley cover.

4. Check whether the tightness of the triangular belt is appropriate. If it is not suitable, open the back cover and adjust it by using the reverse nut connecting the motor base plate to the machine base